analog ground meaning in English
模拟接地
Examples
- In general these two pins should be joined together and to the analog ground of the system
通常，这两个引脚应该就近连接后再接模拟地。 - The labels " analog ground " and " digital ground " on these pins refer to the parts of the converter to which the pins are connected , and not to the system grounds to which they must go
引脚标记说明该引脚已连接到芯片内部的哪个部分，并非要把该引脚连接到电路的哪个参考点。 - To accept the current signal from high negative voltage circuit , the analog ground is raised to a certain positive voltage , which makes it possible for the signal amplitude to be compressed at the same time of its polarity reversion . a pi control program special for laser gyro current control is brought forward according to the conventional pid control method , in which the control signal is figured out corresponding to the difference between the sample and the reference value by turn of proportion - short step integral - long step integral . and at the end of this paper , a comparison of system performance on different conditions is made and the key elements influencing system performance are educed
利用集成a / d 、 d / a转换器的新型芯片aduc824 ，实现了电流(电压)采样?数据处理?电流控制的闭环控制结构；地电位的抬升解决了a / d转换器对负高压回路电流采样时的输入范围匹配问题；控制信号反相的同时进行幅度压缩，使得输出调整电压的分辨率提高；根据常规的比例?积分?微分( pid )调节模型，针对陀螺系统的特性，给出了一种可以满足系统要求、据采样值偏差大小进行的比例?大步长积分?小步长积分、分层次比例?积分算法；不同条件下系统稳流性能的对比、分析在论文最后给出，并据此找出了决定该系统稳流精度的关键因素，提出了系统的改进意见。